LANGUAGE:


Geometric measurement

D600

A universal system for machine applications

Versatile basic system* for geometrical measurements. Thoroughly proven reliability and user-friendly design makes it easy for you to measure almost anything. Simply add laser transmitters and other accessories to suit your purposes. Typical applications: Straightness, flatness, right angles, parallelism and spindle direction in machine tools, mechanical constructions etc.

 

*This is a basic system, which means that you must add suitable laser transmitters and other measurement accessories as necessary for a complete system.
RELATED INFORMATION
System D600

A BASIC SYSTEM CONTAINS:

  • 1 Display unit D279 (27 programs)
  • 1 Detector D5
  • 8 Rods for detector (4x240 mm, 4x60 mm)
  • 1 Magnet base with turnable head
  • 2 Cables with Push/Pull connectors (5 m, 2 m)
  • 1 Manual
  • 1 Measuring tape
  • 1 Protective case for display unit
  • 1 EasyLink™ Windows® program and PC cable
  • 1 Carrying case

 

 

 

CHARACTERISTICS AND FUNCTIONS:

  • Measurement points can be added, removed or re-measured at any point during the measurement process.
  • Possible to offset the reference line in the measurement program
  • Possible to connect up to four detectors in series
  • Handles up to 300 measuring points for flatness
  • Handles up to 150 measuring points for straightness
  • Program that guides you through the measuring procedure speeds up work
  • Expandable with the rest of the Easy-Laser® range
  • 2 year warranty

 

Laser transmitters for different needs
D22

D22

For measuring flatness, straightness, squareness, parallelism and spindle direction. The laser beam can sweep 360° with a measurement distance of 40 metres in radius. The beam can be deflected at 90° to the sweep, within 0.01 mm/m.
D146

D146

For measuring spindle direction and straightness. Can be used in a rotating spindle (max. 2000rpm). Mounting pins with different diameters can be used. The mounting pin can be fitted at either end, for use when aligning rod cartridges, for example. Measurement distance - 20 metres.
D75

D75

For measuring straightness and spindle direction. M6 threads on ends and sides offer alternative mounting options. Measurement distance - 40 metres.
D75 Truebeam

D75 Truebeam

For measuring straightness and spindle direction. M6 threads on ends and sides offer alternative mounting options. Measurement distance - 80 metres.