LANGUAGE:


Geometric measurement

E915

     

Measure with spinning laser. Evaluate directly in true 3D.

See the result as a true 3D image in the display unit directly after measuring. Then evaluate the result easily with different calculation settings, for example three point reference, best fit or all positive. This can also be done directly on site without having to stop to go to a PC with separate analysis programs, which was the case previously. This makes production much more efficient.


The system includes laser transmitter D23 Spin with power rotating head. This is how it works in brief: The laser beam from the transmitter rotates constantly and creates a reference plane over the entire measurement object. Measurements are performed quicker as you do not have to align the beam for each new measurement position. You place the detector at the desired measurement points and register the reading by a push of a button.  In principle, one person can perform the measurement themselves. It is then possible to generate a PDF report containing graphs and measurement data directly from the measurement system’s display unit. All information about the measurement object is documented.
 
RELATED INFORMATION

A COMPLETE SYSTEM CONTAINS:

  • 1 Laser transmitter D23  
  • 1 Detector E5
  • 1 Display unit 
  • 1 Bluetooth® unit   
  • 1 Cable 2 m
  • 1 Cable 5 m (extension)
  • 1 Cable support
  • 1 Safety strap for laser transmitter
  • 2 Targets for rough alignment
  • 1 Magnet base with turnable head
  • 1 Set of rods (6x60 mm, 6x120 mm)
  • 1 Manual
  • 1 Quick manual
  • 1 Measuring tape 5 m
  • 1 USB memory stick
  • 1 USB cable
  • 1 Battery charger (100–240 V AC)
  • 2 Batteries Alcaline R14
  • 1 Toolbox
  • 1 Cleaning cloth for optics
  • 1 EasyLink™ Windows® program (CD)
  • 1 Carrying case

CHARACTERISTICS AND FUNCTIONS:

  • Uses SpinLaserTechnology™ for a constant sweep over the entire surface (360°). You place the detector anywhere in the laser sector and record the reading. No time wasted repositioning the laser beams between the measurement points.
  • Endurio™ Power management system ensures that you never have to stop in the middle of a measurement because the battery has run out.
  • True 3D: you can evaluate the result of the measurement directly in the 3D-image.
  • Program that guides you through the measuring procedure speeds up work.
  • 2 year warranty.

 

 

 
Easy-Laser® Flange system can be used on all sizes of flanges, regardless of diameter. You can measure 1 to 5 circles of measurement points, for example inner, middle and outer circles, in order to see the taper of the flange.